Do-it-yourself Acrylic Frames | How to Make & Hold Your 3D Artwork


Seeking for a way to jazz up your wall art? Try earning your have Do-it-yourself acrylic frames for individualized 3D artwork. This put up will stroll you through exactly how I produced these in my home.




If you are searching for a customized way to frame your images or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the ideal factor.



I landed on these frames for the reason that I wanted a very little something to incorporate a very little more pizzazz to my lavatory wall.&nbsp



We made a decision to incorporate my partner&rsquos adore of golfing into the blend by printing pics he took of PGA golfing classes he&rsquos played in black and white.



I like when artwork is a dialogue piece, so this was the great addition to the rest room wall.



To make it truly stand out, I made these Do it yourself acrylic frames for each of the photographs.



Listed here are the ways I took&hellip&nbsp



Table OF CONTENTS




  • 1. Gather your elements.

  • 2. Tape Check This Out of each individual corner.

  • 3. Mark in which you want to drill your holes.

  • 4. Drill your holes.

  • 5. Use your glue dots to protected your pictures to the body.

  • six. Mark the whole on the wall in which you system to dangle it.

  • 7. Use your punch tool to mark the entire on the wall.

  • eight. Drill your holes in the wall.

  • 9. Screw the standoffs into the wall.

  • 10. Attach your body to the standoffs.

  • eleven. Revel in the completed products!



Disclaimer: This publish does contain affiliate backlinks for your comfort. This is at NO extra price to you but earns me a smaller fee. To read additional, check out our&nbspdisclosure policy.



one. Get YOUR Resources.



Initially factors initially, assemble all your materials. All sources for everything I applied are linked below. I also included a record with backlinks of what we utilised to dangle the frames, too.&nbsp



FOR Generating THE Diy ACRYLIC FRAMES:




  • Plexiglass/Acrylic Sheets

  • Standoffs

  • Glue Dots

  • Piece of Lined Paper

  • Drill&nbsp

  • Drill Bits&nbsp(a person for the sizing of the opening of your standoffs and a person for the screw for the wall)

  • Painter&rsquos Tape

  • Ruler

  • Marking Software (I made use of a Sharpie)



FOR HANGING THE Do-it-yourself ACRYLIC FRAMES:




  • Pencil

  • Handheld Level

  • Punch

  • Screwdriver



two. TAPE Each Aspect OF Just about every CORNER.



Plexiglass/acrylic is very fragile.



For the reason that of this, you have to be incredibly thorough when you are drilling the holes.



Putting a piece of painter&rsquos tape on both aspect exactly where you approach to drill your hole will assist hold the acrylic sheet from breaking or cracking when you drill.



I also saved the protective cover on just about every side of the piece, way too.



three. MARK The place YOU WANT TO DRILL YOUR HOLES.



As soon as you have positioned the painter&rsquos tape on all four sides (or having said that numerous destinations you prepare to drill a gap), you can location a mark of where by you want to drill your hole.



I drilled my holes one&Prime in from each and every edge as you can see from the image over.



4. DRILL YOUR HOLES.



Before actually drilling, double and triple check that your marks are degree each horizontally and vertically.



You&rsquoll want to have these amount for when you hang them.&nbsp



The drill little bit you decide on need to be huge adequate to let the standoff to healthy inside of the hole.



I would do a check operate on a piece of scrap substance to make absolutely sure it is huge more than enough.&nbsp



After you are sure that the marking are amount and the bit is big plenty of, you want to start off drilling.



Here is a very good movie to follow if you would like a demonstration on&nbsphow to drill by way of acrylic.



You want to use about half power when you are drilling.



Gradual and steady. If you go to rapid, the acrylic will crack, so take your time.



As you drill you really should see spirals of the acrylic bit by bit remaining taken out.&nbsp



Repeat the drilling for just about every gap you want.



five. USE YOUR GLUE DOTS TO Secure YOUR Pictures TO THE Body.



Once your holes are established, you can insert your photo to the piece of acrylic/body.



The important in this article is to once again, make sure your picture is degree right before you entirely secure it to the body.



The glue dots are incredibly sticky and don&rsquot allow for for a ton of wiggle place, so it may perhaps be a superior concept to line up a piece of lined paper driving the frame to assistance you line the edges of your image.



Regardless of what trick functions for you to make certain the photo receives glued to the body stage will do.&nbsp



six. MARK THE Entire ON THE WALL The place YOU Plan TO Dangle IT.



As you get started to hold, mark your holes on the wall, but make absolutely sure your body is level.



If you calculated appropriately in the step before drilling, the holes on your body need to now be degree.



If you are hanging a lot more than 1 frame like I did, make certain just about every body is amount in your grid, too.&nbsp



seven. USE YOUR PUNCH Instrument TO MARK THE Entire ON THE WALL.



I really like this instrument so a great deal due to the fact it will get your gap started and will allow your drill to stay in area when you begin drilling.



If you don&rsquot have one particular, I very recommend it!



8. DRILL YOUR HOLES IN THE WALL.



Be positive to use a bit that fits the screws that came along with your standoffs.



This will most likely be a more compact bit than the one you employed on the frames.



I also utilised a stud finder to see if I needed drywall anchors, but simply because these frames are not that weighty, you could probably do without the need of them.



9. SCREW THE STANDOFFS INTO THE WALL.



At the time you order your standoffs, you&rsquoll see how they operate.



In purchase for the photo to &ldquostand off&rdquo the wall, you have to safe the standoff with the delivered screw prior to attaching the photograph to the standoffs.



As you can see from the photo, making certain everything is level and calculated effectively is tremendous vital.&nbsp



10. Attach YOUR Frame TO THE STANDOFFS.



After you&rsquove connected the standoffs, it&rsquos time to attach the shots!



Line up the standoffs with your drilled holes and safe the standoffs.



If all goes properly, every thing will line up correctly and be ready to go!



If you are like my father and I, you&rsquoll arrive across at least just one that doesn&rsquot line up flawlessly.



For this, we cheated a small bit and secured the standoff to the body and used a glue dot to secure it to the wall, so it didn&rsquot go.



We only experienced to do this for two corners of two frames, but don&rsquot fret if you mess up one particular&hellip We&rsquove been there!&nbsp



eleven. REVEL IN THE Finished Products!




Now it&rsquos time to delight in your function!



We did a grid of nine complete images which was a major enterprise with all the measuring, but I&rsquom in enjoy with how it turned out.



Allow me know in the feedback what you feel of the finished solution!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top